By using our website, you agree to our cookie policy OK

Home » Talaria » Aftermarket » KO Upgrades » KO Factory Spec Rush Controller – Talaria Sting / Sting R

KO Factory Spec Rush Controller - Talaria Sting / Sting R



The KO Rush Controller is the highest output controller available for the Talaria Sting MX, L1E, Sting R and Sting R L1E, capable of 600Amp of line current at 100V peak input with a total power capability of 60KW. Full 24Hr tuning and set up support is available from KO Moto direct through the KO Support Discord, these controllers also benefit from warranty cover once registered via the KO Moto website. A controller for the real enthusiast, the KO Rush controller is completely tuneable by Bluetooth app that gives unparalleled customisation of the tuning. Please note: the controller needs setting up once fitted, the KO App will automatically set up base parameters, but full tuning is advised to get the most out of the controller.


  • ∙Peak 60KW Power (Your battery will determine the power you can produce, and different motors will not be able to handle Max Power)
  • ∙Anodized cases
  • ∙Input Voltage range of 40v-100v
  • ∙Working Voltage of 48v-100V
  • ∙Max Phase Current 1800A
  • ∙Max Line Current 600A
  • ∙IP67 Ingress Protection
  • ∙Dynamic tuning capabilities allow hundreds of tunes for the end user, easily modified to your exact liking via Bluetooth or direct cable options.

UK Warranty

Warranty becomes effective from the date of purchase, from an authorised retailer. Warranty is only valid for the initial purchasing customer and is not transferable thereafter. KO reserve the right to modify or change this product without notice. For full warranty details and registration of the Warranty, this MUST be completed by the purchaser, on the KO website at the following:


The warranty periods listed above are subject to the intended use conditions and does not cover wanton misuse, damage, operation outside listed specifications, or operation outside of the intended use for the motor and controller (which is as an upgrade part to the Sur-Ron and Talaria Motorcycles exclusively at 60v or 72v nominal voltage).​Warranty is void on any product which has been modified in any way. This includes 3rd party repairs, soldering, modifications to the casing, or repairs using 3rd party parts. The validity of a warranty claim will always be at the sole discretion of KO Technologies. Any warranty claim must first be validated by proof of purchase from either the KO Moto website, or from one of the authorised dealers. Then returned to one of the KO repair centres, Once received KO will assess the issue and decide on the validity of the claim. The purchaser will also be liable for the cost of shipping to the repair centre, where if the claim is deemed valid, they will receive a full refund of the cost of the shipping. Once a claim is validated KO will make the decision on whether to repair or replace the item at their sole discretion.​As a part of the warranty agreement KO will replace or repair defective products and parts only. This warranty does not cover the cost of any repairs to your bike from non-authorized third parties and they reserve the right to withhold the cost of any labour cost conducted as part of a repair service.